Factory Reset Preserving Root

CloneNum3
Site Admin
Posts: 107
Joined: Wed Jan 07, 2015 10:02 am

Factory Reset Preserving Root

Postby CloneNum3 » Thu Apr 23, 2015 11:51 am

Is your wink in an unknown situation but you do have root? Here's a last resort to clean up as much as possible without losing root.

Assumptions:
* Your update partition is still OK to the best of your knowledge (currently at 00.08)
* You still have root

Untested... Proceed at your own risk... please report success/failure

[OPTIONAL] Wipe out any/all of your configurations including hubs, lights, etc.

Code: Select all

aprontest --zwave_controller_reset
killall -9 monit hub aprond ZigBeeHACoord lutron-core
rm /database/apron.db
rm /database/lutron-db.sqlite
sync
sync


[Preserving Root]

Code: Select all

touch /database/ENABLE_SSH
cp /root/.ssh/authorized_keys /database/authorized_keys
sed -i 's/reboot/#reboot/g' /root/platform/*.sh
cp /var/www/set_dev_value.php /database/set_dev_value.php # Save for later


[Prepare the update partition if it hasn't already been done... if in doubt, do it again]

Code: Select all

ubiattach -p /dev/mtd2
mkdir /tmp/updater
mount -t ubifs ubi2:rootfs /tmp/updater
sed -i 's/reboot/#reboot/g' /tmp/updater/root/platform/*.sh
cp -r /root/.ssh /tmp/updater/root/
chmod 655 /tmp/updater/root/.ssh
chmod 644 /tmp/updater/root/.ssh/authorized_keys
rm -f /tmp/updater/etc/init.d/S99local
touch /tmp/updater/database_default/ENABLE_SSH
cp /database/authorized_keys /tmp/updater/database_default/
cp /database/set_dev_value.php /tmp/updater/var/www/set_dev_value.php # re-enables the http hack we first used to root
reboot


[Delete the version files so your wink gets the update no matter what version you are/were at]

Code: Select all

rm -f /database/cf_*


[Instruct the hub to boot to the update partition next time it boots and reboot]

Code: Select all

echo 1 > /database/DO_UPDATE
reboot

Proceed with #### 6. Reboot #### at http://www.rootwink.com/viewtopic.php?f=6&t=4

End result, if you chose to do the optional step too, your hub should be fully updated and nearly factory except for you'll still have root.

Return to “Factory Reset Preserving Root”

Who is online

Users browsing this forum: No registered users and 1 guest