Problem after upgrade ... need help

How does the Wink Hub do what it does? What's stored in the database? What does the aprond daemon do? what does aprontest communicate with? What is the ultimate question?
newbie
Posts: 2
Joined: Tue Oct 20, 2015 8:11 am

Problem after upgrade ... need help

Postby newbie » Tue Oct 20, 2015 8:12 am

Hi
I have a problem with my wink. I have console acces but here is the output.
Please someone help me

Thanks

Loading file 'DO_UPDATE' to addr 0x42000000 with size 1 (0x00000001)...
Done
word at 0x42000000 (0x31) != word at 0x42000004 (0x30)
Total of 0 word(s) were the same

NAND read: device 0 offset 0x300000, size 0x300000
3145728 bytes read: OK
Wrong Image Format for bootm command
ERROR: can't get kernel image!

NAND read: device 0 offset 0x2b00000, size 0x400000
4194304 bytes read: OK
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Falling back to updater...

NAND read: device 0 offset 0x300000, size 0x300000
3145728 bytes read: OK
Wrong Image Format for bootm command
ERROR: can't get kernel image!

NAND read: device 0 offset 0x2b00000, size 0x400000
4194304 bytes read: OK
Wrong Image Format for bootm command
ERROR: can't get kernel image!
=> printenv
app_boot=run appboot_args && nand read ${loadaddr} app-kernel 0x00400000 && boot m ${loadaddr}
app_boot_bad=run updater_args; setenv bootargs ${bootargs} badapp; nand read ${l oadaddr} updater-kernel 0x00300000; bootm ${loadaddr}
appboot_args=setenv bootargs 'noinitrd console=ttyAM0,115200 rootfstype=ubifs ub i.mtd=5 root=ubi0:rootfs rw gpmi';
baudrate=115200
bd_addr=0021CC0892FA
boot_app=run app_boot || run app_boot_bad
boot_getflag=mtdparts default && ubi part database && ubifsmount ubi0:database & & mw 42000000 0 8 && ubifsload 42000000 DO_UPDATE 1 && run boot_logic
boot_logic=mw 42000004 30; if cmp 42000000 42000004 1; then run boot_app; else r un boot_updater; fi;
boot_updater=run updater_boot || run updater_boot_bad
bootargs=noinitrd console=ttyAM0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:roo tfs rw gpmi badupdater
bootcmd=mtdparts default; run boot_getflag || echo Falling back to updater...; r un boot_updater
bootdelay=0
bootfile=uImage
ethact=FEC0
ethaddr=00:04:00:00:00:00
ethprime=FEC0
filesize=1
loadaddr=0x42000000
mtddevname=u-boot
mtddevnum=0
mtdids=nand0=gpmi-nand
mtdparts=mtdparts=gpmi-nand:3m(u-boot),4m(updater-kernel),28m(updater-rootfs),8m (database),8m(app-kernel),-(app-rootfs)
partition=nand0,0
serialno=152201021WZD1
stderr=serial
stdin=serial
stdout=serial
updater_args=setenv bootargs 'noinitrd console=ttyAM0,115200 rootfstype=ubifs ub i.mtd=2 root=ubi0:rootfs rw gpmi';
updater_boot=run updater_args && nand read ${loadaddr} updater-kernel 0x00300000 && bootm ${loadaddr}
updater_boot_bad=run appboot_args; setenv bootargs ${bootargs} badupdater; nand read ${loadaddr} app-kernel 0x00400000; bootm ${loadaddr}
ver=U-Boot 2014.01-14400-gda781c6-dirty (Apr 30 2014 - 22:35:38)

newbie
Posts: 2
Joined: Tue Oct 20, 2015 8:11 am

Re: Problem after upgrade ... need help

Postby newbie » Tue Oct 20, 2015 9:16 am

Hi

I think that i formatted mtd1 and mtd4 and my copy didnt worked.. REBOOTED and now nothing...
Can someone guide me to restore mtd1 and mtd4.

Thanks


Return to “How does it work?”

Who is online

Users browsing this forum: No registered users and 1 guest